Stack Stone - Ozark

Good morning. I would like to acquire 300 square feet and maybe a couple of boxes of corners. Do you have 300 square feet in stock? I look forward to hearing from you.

Thank you for your question and interest in our stone veneer. Our website has a built-in freight calculator, simply add products to your cart, add your delivery address, and you will be provided with shipping options including estimated delivery times. Please note that the estimated delivery times do not include production times as most of our items are made to order. Currently our production lead time is around four – five weeks. Please let us know if you have any more questions.

In case I would like to these stones on a kitchen wall, do I need to spray anything on the stones due to potential grease?

Thank you for your question and interest in our stone veneer. A concrete sealer is not required, however, sealing with a concrete sealer will add protection especially over the mortar joints. Please keep in mind that different concrete sealers will affect the appearance of the stone veneer. A matte (or flat) finish will have little to know impact to the finished look of the stone veneer whereas a gloss finish will darken the stone veneer and have a wet look. We recommend testing your concrete sealer on a piece of stone veneer that has not been installed to ensure you are happy with the finished appearance after applying concrete sealer. Please let us know if you have any more questions.

Greetings, wondering where I can go to see some of your product on walls? Is there a particular store or showplace in the San Diego area? I am especially interested in the stack stone ozark. Doing a whole house and need to decide very soon, so thanks for a quick response.

Thank you for your question and interest in our stone veneer. Our production facility is in Fair Play, South Carolina which is in the upstate of South Carolina, but we ship orders all over the country. Unfortunately, we do not sell through local distributors only via our website. We offer samples of all of our brick veneer and stone veneer at https://blackbearmountainstone.com/collections/samples. Our samples, on average cover a 6"x6" area and are actual product. Our samples allow you to see and touch the product and get a good understanding of weight, thickness, color and color variation, etc. We encourage all of our customers to test our samples to ensure they meet your standards and expectations, and of course if you have any questions please let us know, we are more than happy to help you! And as an added bonus when you purchase Black Bear Mountain Stone samples, we cover the shipping (applies to the continental USA. For orders shipping to Canada, Alaska, Hawaii, and Puerto Rico please contact us for shipping rates). You can order a sample of the specific product you are looking at here https://blackbearmountainstone.com/products/stack-stone-ozark-sample. Please let us know if you have any more questions.

For new construction, would it be better to provide a brick ledge for stack stone? If so, how wide should ledge be? 3-1/2"? 5-1/2"?

Thank you for your question and interest in our stone veneer. Our stone veneer does not come with a top ledge piece; however, we offer this as an accessory. Please see https://blackbearmountainstone.com/products/window-sill-water-table-slate. Our stack stone averages about 2" thick, so 3.5" would work if you decided to use the brick ledge. Our sills measure 3" deep, by 17.5" long, however you will most likely have a grout joint in between them so for measuring purposes please use 18", by 2.5" tall in the back and 2" tall in the front as our sills have approximately a 1/2" slope from the back to the front for water runoff. Installation is easy, simply install the back flat to the wall, no need to tilt or angle them down. Also, our sills have a drip edge groove cut into the bottom side so water cannot run behind the stone veneer installed underneath the sills. Please let us know if you have any more questions.

Do you have a minimum order? Also, can a sample be ordered?

Thank you for your question and interest in our stone veneer. We do have a minimum order. Our field stone, hackett stone, ledge stone, lime stone, and stack stone profiles are 50 square feet minimums (5x 10 square foot boxes). Our ready stack mini panel system is a minimum of 54 square feet (6 x 9 square foot boxes). Our brick veneer is also a minimum of 50 square feet (2x 25 square foot boxes). We offer samples of all of our brick veneer and stone veneer at https://blackbearmountainstone.com/collections/samples. Our samples, on average cover a 6"x6" area and are actual product. Our samples allow you to see and touch the product and get a good understanding of weight, thickness, color and color variation, etc. We encourage all of our customers to test our samples to ensure they meet your standards and expectations, and of course if you have any questions please let us know, we are more than happy to help you! And as an added bonus when you purchase Black Bear Mountain Stone samples, we cover the shipping (applies to the continental USA. For orders shipping to Canada, Alaska, Hawaii, and Puerto Rico please contact us for shipping rates). You can order a sample of the specific product you are looking at here https://blackbearmountainstone.com/products/stack-stone-ozark-sample. Please let us know if you have any more questions.